CET-2001Q Epoxy Resin Grout bakeng sa li-Sensors tsa Quartz
Tlhaloso e Khutšoanyane:
CET-200Q ke karolo ea 3 e fetotsoeng epoxy grout (A: resin, B: e phekolang, C: filler) e etselitsoeng ho kenya le ho ts'oara li-sensor tsa quartz tse matla (li-WIM sensors). Sepheo sa eona ke ho tlatsa lekhalo pakeng tsa groove ea motheo ea konkreite le sensor, ho fana ka tšehetso e tsitsitseng ho netefatsa ts'ebetso e tsitsitseng ea nako e telele ea sensor le ho lelefatsa bophelo ba eona ba tšebeletso.
Lintlha tsa Sehlahisoa
Kenyelletso ea Sehlahisoa
CET-200Q ke karolo ea 3 e fetotsoeng epoxy grout (A: resin, B: e phekolang, C: filler) e etselitsoeng ho kenya le ho ts'oara li-sensor tsa quartz tse matla (li-WIM sensors). Sepheo sa eona ke ho tlatsa lekhalo pakeng tsa groove ea motheo ea konkreite le sensor, ho fana ka tšehetso e tsitsitseng ho netefatsa ts'ebetso e tsitsitseng ea nako e telele ea sensor le ho lelefatsa bophelo ba eona ba tšebeletso.
Sebopeho sa Sehlahisoa le Karolelano ea ho Kopanya
Likaroloana:
Karolo ea A: Resin ea epoxy e fetotsoeng (2.4 kg / barrel)
Karolo ea B: Sephedi (0.9 kg/barrel)
Karolo ea CSehlahi (16.7kg/barrel)
Karolelano ea ho Kopanya:A:B:C = 1:0.33:(5-7) (ka boima ba 'mele), boima ba 'mele bo kentsoeng pele bo fihla ho 20 kg / sete.
Tekheniki Parameters
| Ntho | Tlhaloso |
| Nako ea ho folisa (23℃) | Nako ea ho sebetsa: 20-30 metsotso; Boemo ba pele: lihora tse 6-8; Phekolo ka botlalo: matsatsi a 7 |
| Matla a Khatellang | ≥40 MPa (matsatsi a 28, 23 ℃) |
| Flexural Matla | ≥16 MPa (matsatsi a 28, 23℃) |
| Bond Matla | ≥4.5 MPa (e nang le konkreite ea C45, matsatsi a 28) |
| Mocheso o sebetsang | 0 ℃ ~ 35 ℃ (ha e khothalletsoe ka holimo ho 40 ℃) |
Tokisetso ea Kaho
Base Groove Dimensions:
Bophara ≥ Sensor bophara + 10mm;
Botebo ≥ Bophahamo ba kutlo + 15mm.
Kalafo ea Base Groove:
Tlosa lerōle le litšila (sebelisa moea o hatelitsoeng ho hloekisa);
Hlakola bokaholimo ba groove ho netefatsa ho omella le maemo a se nang oli;
Sebaka sa groove se tlameha ho se be le metsi a emeng kapa mongobo.
Mehato ea ho Kopanya le Kaho
Ho kopanya Grout:
Kopanya likarolo tsa A le B ka mochine oa ho phunya ka motlakase bakeng sa metsotso e 1-2 ho fihlela seaparo.
Eketsa karolo ea C 'me u tsoele pele ho kopanya metsotso e 3 ho fihlela ho se na granules e setseng.
Nako ea ho sebetsa: Grout e tsoakiloeng e tlameha ho tšeloa nakong ea metsotso e 15.
Ho tšela le ho kenya:
Tšela grout ka har'a groove ea motheo, ho tlatsa hanyenyane ka holim'a boemo ba sensor;
Etsa bonnete ba hore sensor e tsepamisitsoe, e nang le grout e ts'oanang ka mahlakoreng 'ohle;
Bakeng sa ho lokisoa ha lekhalo, bophahamo ba grout bo lokela ho ba hanyane kaholimo ho sebaka sa motheo.
Thempereichara le Ho Kopanya Ratio Liphetoho
| Ambient Mocheso | Tšebeliso e khothalelitsoeng (kg/batch) |
| <10℃ | 3.0~3.3 |
| 10 ℃ ~ 15 ℃ | 2.8~3.0 |
| 15 ℃ ~ 25 ℃ | 2.4~2.8 |
| 25 ℃ ~ 35 ℃ | 1.3~2.3 |
Hlokomela:
Ka mocheso o tlase (<10℃), boloka thepa sebakeng sa 23℃ lihora tse 24 pele u sebelisoa;
Ka mocheso o phahameng (> 30 ℃), tšela ka libache tse nyane kapele.
Phekolo le Ho Buloa ha Sephethephethe
Maemo a Pholiso: Ho omisoa ha bokaholimo ho etsahala kamora lihora tse 24, ho lumella lehlabathe; phekolo e feletseng e nka matsatsi a 7.
Nako ea ho Bula Sephethephethe: Grout e ka sebelisoa lihora tse 24 kamora ho folisoa (ha mocheso o holim'a metsi ≥20℃).
Litlhokomelo tsa Tšireletso
Basebetsi ba kaho ba tlameha ho roala liatlana, liaparo tsa mosebetsi, le likhalase tse sireletsang;
Haeba grout e kopana le letlalo kapa mahlo, hlatsoa hang-hang ka metsi a mangata 'me u batle ngaka haeba ho hlokahala;
U se ke ua tšela grout e sa phekolehang mehloling ea metsi kapa mobung;
Etsa bonnete ba hore ho na le moea o motle setšeng sa kaho ho qoba ho hema mouoane.
Ho paka le ho Boloka
Sephutheloana:20 kg/sete (A+B+C);
Polokelo:Boloka sebakeng se pholileng, se omeletseng, se tiisitsoeng; Shelf bophelo ba likhoeli tse 12.
Hlokomela:Pele ho hahoa, leka sampole e nyane ho netefatsa hore karolelano ea ho kopanya le nako ea ho sebetsa e kopana le maemo a setšeng.
Enviko esale a sebetsa ka thata ho Weigh-in-Motion Systems ka lilemo tse fetang 10. Li-sensor tsa rona tsa WIM le lihlahisoa tse ling li tsebahala haholo indastering ea ITS.
